Sync your BMW controls with your DMD navigation system.
The DMD BMW Sync Box is a Can Bus module for BMW motorcycles, it allows you to use the BMW Wonder Wheel to control the DMD2 app and display motorcycle information like TPMS / RPM / Temperature!
Up to 8 functions with the BMW Wonder Wheel (with easy switch between BMW TFT and navigation device) plus motorcycle sensors like TPMS, Gear and Temperatures.
Communicates over Bluetooth or using the specific DMD Remote cable connection.
No batteries needed. The device gets power directly from the motorcycle connection. It completely shuts down when the motorcycle is turned off (no motorcycle battery drain).
Control DMD2 and other navigation apps using the BMW controls:
– Wonder Wheel rotate Up / Down
– Wonder Wheel press and long press Left / Right
– Blinker Cancel press and long press
– Menu Down long press – to switch between BMW TFT / Device
+ combinations of Wheel Left + Cancel Blinker and Wheel Right + Cancel Blinker.
A total of 11 different key functions!
Get sensor data from your motorcycle to display in the DMD2 app. Information including RPM, TPMS info, Engine Temperature, Ambient Temperature, Gear Indicator, and Throttle Position can be displayed in the DMD2 Drive Mode Dashboard app.
With this box you no longer need a remote controller or the OBD dongle.
It does not require any Navigation Preparation kit from BMW, it uses direct CAN-BUS connection and can be used with any other CAN-BUS accessories, our provided cables are all splitter type design.
Can be connected to our DMD devices by cable (like our DMD remotes) or if you do not own a DMD device, you can connect to it by Bluetooth!
Refer to the BMW Sync Box Manual linked below to verify compatibility with your BMW motorcycle.
Sync your BMW controls with your DMD navigation system.
The DMD BMW Sync Box is a Can Bus module for BMW motorcycles, it allows you to use the BMW Wonder Wheel to control the DMD2 app and display motorcycle information like TPMS / RPM / Temperature!
Up to 8 functions with the BMW Wonder Wheel (with easy switch between BMW TFT and navigation device) plus motorcycle sensors like TPMS, Gear and Temperatures.
Communicates over Bluetooth or using the specific DMD Remote cable connection.
No batteries needed. The device gets power directly from the motorcycle connection. It completely shuts down when the motorcycle is turned off (no motorcycle battery drain).
Control DMD2 and other navigation apps using the BMW controls:
– Wonder Wheel rotate Up / Down
– Wonder Wheel press and long press Left / Right
– Blinker Cancel press and long press
– Menu Down long press – to switch between BMW TFT / Device
+ combinations of Wheel Left + Cancel Blinker and Wheel Right + Cancel Blinker.
A total of 11 different key functions!
Get sensor data from your motorcycle to display in the DMD2 app. Information including RPM, TPMS info, Engine Temperature, Ambient Temperature, Gear Indicator, and Throttle Position can be displayed in the DMD2 Drive Mode Dashboard app.
With this box you no longer need a remote controller or the OBD dongle.
It does not require any Navigation Preparation kit from BMW, it uses direct CAN-BUS connection and can be used with any other CAN-BUS accessories, our provided cables are all splitter type design.
Can be connected to our DMD devices by cable (like our DMD remotes) or if you do not own a DMD device, you can connect to it by Bluetooth!
Refer to the BMW Sync Box Manual linked below to verify compatibility with your BMW motorcycle.
